When a controller fails to start, judders, overheats or burns power devices, diagnose in the order of power, signals and load. First measure battery voltage, fuses, key switch and ground, then throttle output, brake switch, hall signals and phase wires, and only then suspect the controller internals.
A healthy throttle output should change smoothly with rotation; a brake switch that is not released can force the controller into protection; missing hall or phase signals cause juddering and noise. Clearly excessive no-load current or a controller that becomes hot within minutes may indicate failed power devices or capacitors, or a partially shorted motor winding.
Cross-swap a known-good controller or motor of the same type to isolate the fault quickly. Replacing power devices, gate-drive circuits and capacitors requires professional tools and experience. Controllers that have been flooded, burned or repeatedly failed are best replaced rather than repaired.